We didn’t want to make just another accessory controller, we wanted to make a smarter one.
Harness the power and intelligence of your vehicle’s CANbus electrical system. The DENALI CANsmart Controller provides plug-n-play installation of up to four accessories to enable dozens of customizsable settings that can be controlled right from the BMW “WonderWheel” or the CANsmart Accessory Manager Software.
The four dedicated circuits are pre-programmed to connect and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to rock right out of the box.
The two auxiliary light circuits enable independent adjustment of high and low beam brightness right from the vehicles “WonderWheel”. It also features a “flash to pass” and “strobe when horn active” setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn.
The feature-rich brake light circuit will transform a simple 2-wire brake light into a “smart brake light” complete with running light, multiple flash pattern, and deceleration activated braking functionality.
The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.
Simple Circuit Over-Ride
Want more flexibility; we thought you might. You can set any of the four circuits to “Simple Circuit” Mode which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. Use this setting to power an alternative accessory in place of the dedicated DENALI accessory. The electronic fuse is the only active setting so you can properly fuse your accessory.
(x1) CANsmart Controller
(x2) 4ft LED Light Extension
(x1) 5ft SoundBomb Horn Extension
(x1) Brake Light Pigtail
(x4) Zip Tes
(x1) Adhesive Velcro
(x1) Micro USB Programming Cable
33 Available Settings Via the CANsmart Accessory Manager Software