SKU: DENDNL.WHS.11602

DENALI 2.0 Plug-n-Play CANsmart Controller for BMW R1200 LC Series

£209.99

This CANsmart Controller is designed to work with the CAN Bus instruction set on the BMW R1200 LC Series of bikes, it provides plug-n-play installation of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW “WonderWheel” or the CANsmart Accessory Manager Software.

Product Description

We didn’t want to make just another accessory controller, we wanted to make a smarter one.

Harness the power and intelligence of your vehicle’s CANbus electrical system.  The DENALI CANsmart Controller provides plug-n-play installation of up to four accessories to enable dozens of customizsable settings, the two front light channels can be controlled from the BMW “WonderWheel” or the CANsmart Accessory Manager Software allowing incremental changes to the lights output in 10% steps up or down.

The four dedicated circuits are pre-programmed to connect and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to rock right out of the box.

The two auxiliary light circuits enable independent adjustment of high and low beam brightness right from the vehicles “WonderWheel”. It also features a “flash to pass” and “strobe when horn active” setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn.  The lights will automatically switch between the configured output settings based on whether you are using your bikes Daytime Riding Light (DRL), dipped headlight or main beam, no additional; buttons to press they just work.  Also when you indicate (depending on how you configure the lights) either the lights on the side that is indicating or all the auxiliary lights will switch off so your indicator can be clearly seen.  This males your signals clearer to other road users and increases your safety.

The feature-rich brake light circuit will transform a simple 2-wire brake light into a “smart brake light” complete with running light, multiple flash pattern, and deceleration activated braking functionality.

The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.

Simple Circuit Over-Ride

Want more flexibility; we thought you might. You can set any of the four circuits to “Simple Circuit” Mode which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. Use this setting to power an alternative accessory in place of the dedicated DENALI accessory. The electronic fuse is the only active setting so you can properly fuse your accessory.

What’s In The Box?
(x1) CANsmart Controller
(x2) 4ft LED Light Extension
(x1) 5ft SoundBomb Horn Extension
(x1) Brake Light Pigtail
(x4) Zip Tes
(x1) Adhesive Velcro
(x1) Micro USB Programming Cable

33 Available Settings Via the CANsmart Accessory Manager Software

6 Available Settings Via your Vehicle’s Multifunction Switches (WonderWheel)

Additional information

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “DENALI 2.0 Plug-n-Play CANsmart Controller for BMW R1200 LC Series”

Your email address will not be published. Required fields are marked *

Product Summary

DENALI 2.0 Plug-n-Play CANsmart Controller for BMW R1200 LC Series

£209.99