SKU: DENDNL.WHS.13000

DENALI 2.0 CANsmart Plug-N-Play Controller For ALL KTM Duke & Adventure Models

£209.99

This CANsmart Controller is designed to work with the CAN Bus instruction set on all the KTM Duke and Adventures Series of bikes. It provides plug-n-play installation of up to four accessories to enable more than 35 features and customisable settings. Light dimming “on the fly” is possible with a handlebar-mounted accessory switch or the CANsmart Accessory Manager Software.

Product Description

The KTM CAN bus accessory controller (CANsmart), has four dedicated circuits. These are pre-programmed to connect to and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused. And of course it is ready to use right out of the box. The best – free software (for Mac or PC) allows you to customise these circuits. Having said that, the default settings will be right for the vast majority of installations.

“Flash to pass” and “strobe when horn active” settings

This new KTM CANbus accessory controller also features a “flash to pass” and “strobe when horn active” setting. As a result, it will strobe the auxiliary lights when you pulse your high beam switch or sound your horn. The feature-rich brake light circuit will transform a simple two-wire brake light into a smart brake light, complete with running light, multiple flash pattern, and deceleration-activated illumination. The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.

DENALI’s KTM CANbus accessory controller offers you more than 35 programmable settings

Want more flexibility? We thought you might! In addition to the above great features, the KTM CAN bus accessory controller has more than 35 programmable settings that you can adjust. Or you can set any of the four circuits to Simple Circuit Mode. As a result the controller will disable all custom circuit settings to provide a clean switched 12V circuit. This way you can power an accessory of your choice. The electronic fuse is the only active setting, so you can properly fuse your accessory too.

Features:

  • True Plug & Play installation
  • Offers custom control of your electrical accessories
  • 4 dedicated circuits pre-programmed to control two sets of auxiliary lights, an auxiliary horn and an auxiliary brake light
  • Each circuit is electronically fused and pre-configured to use right out of the box
  • With the CANsmart Accessory Manager Software you can adjust any of the 35 customisable settings
  • When horn active your auxiliary lights will strobe
  • Compatible with the DENALI B6 Auxiliary Brake Light for integrated running light, multiple flash pattern, deceleration & activated braking functionality
  • Permits use of auxiliary horn like the DENALI SoundBomb without having to add a relay or dedicated horn wiring harness

To find out more about CAN bus accessory controllers, read our blog post here.

What’s in the box:

  • CANsmart Controller
  • 2 x 1.21m (4ft) light extension cables
  • 1 x 1,5m (5ft) SoundBomb horn extension cable
  • Brake light pigtail
  • Zip-ties
  • Adhesive hook-and-loop fastener
  • Micro USB programming cable

 

The KTM CAN bus accessory controller is compatible with:

  • All KTM 790 & KTM 1290 Duke models
  • All KTM 790 Adventure models
  • All KTM 1090 & KTM 1190 Adventure models
  • All KTM 1290 Super Adventure models

For more information on the KTM CAN bus accessory controller, have a look at : https://denalielectronics.com/pages/ktm-cansmart-controller

Additional information

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “DENALI 2.0 CANsmart Plug-N-Play Controller For ALL KTM Duke & Adventure Models”

Your email address will not be published. Required fields are marked *

Product Summary

DENALI CANsmart CANbus Accessory Controller for KTM

DENALI 2.0 CANsmart Plug-N-Play Controller For ALL KTM Duke & Adventure Models

£209.99

You may also like…