HEX ezCAN ORDOS for KTM 1390 Super Adventure 2026- Plug & Play Kit
£209.99
The HEX ezCAN Ordos for KTM is a plug & play CAN bus accessory controller designed specifically for the KTM 1390 Super Adventure S, S EVO and R (2026 onwards).
Add and control auxiliary lights, an upgraded horn, brake lights, heated gear and other electrical accessories without cutting into your bike’s original wiring.
HEX ezCAN Ordos for KTM 1390 Super Adventure
Want to add auxiliary lights, a louder horn, extra brake lights or manage heated gear from your KTM 1390 Super Adventure controls?
The HEX ezCAN Ordos makes it much easier to install and control electrical accessories without cutting into your KTM's original wiring.
Designed specifically for the 2026 onwards KTM 1390 Super Adventure models, the Ordos connects directly to the bike's CAN bus through the diagnostic connector. This allows compatible accessories to work with the motorcycle's existing controls and signals.
No separate handlebar switches are needed for supported functions, and you can configure your accessories to work the way you want them to.
What can you connect to the HEX ezCAN Ordos?
The Ordos gives you plenty of flexibility when adding electrical accessories to your KTM:
- Auxiliary driving lights: Add extra lighting, adjust brightness and configure high beam integration.
- Upgraded horn: Install a more powerful horn, such as the DENALI SoundBomb, without overloading the bike's original horn circuit.
- Additional brake lights: Improve rear visibility with auxiliary brake lights and configurable braking functions.
- Heated clothing: Power your heated riding gear through a dedicated, configurable circuit.
- Other electrical accessories: Power navigation devices, cameras and other suitable 12V accessories.
All managed through one compact accessory controller.
How does the HEX ezCAN Ordos work?
The Ordos connects to your KTM's battery for power and to the motorcycle's CAN bus through its diagnostic connector.
It reads the relevant signals from your bike and uses them to control the accessories you've connected.
Using the HEX ezCAN configuration software for Windows or Mac, you can assign functions to individual output circuits and adjust how your accessories operate.
Key features
- KTM-specific CAN bus integration: Designed for the 2026+ KTM 1390 Super Adventure range.
- Four configurable output circuits: Control different accessories independently.
- 30 Amp total current capacity: Plenty of capacity for most motorcycle accessory setups, subject to individual circuit limits.
- Integrated HEX ezBUS technology: Connect up to 15 compatible low-powered smart accessories through the white output circuit.
- Up to 18 accessories in total: Three conventional outputs plus up to 15 Certified HEX ezBUS-Ready accessories.
- Configurable electronic circuit protection: Set the appropriate fuse limits for your connected accessories.
- No cutting into factory wiring: Connects to the bike's diagnostic connector and battery.
- Rugged construction: Dust-resistant and water-resistant for motorcycle use.
HEX ezBUS: Connect even more accessories
The Ordos includes HEX's ezBUS technology, allowing multiple Certified HEX ezBUS-Ready accessories to share the white output circuit.
Instead of using a separate circuit for every accessory, compatible smart accessories can be connected in a daisy chain.
The white circuit supports up to 15 of these accessories, while the remaining three circuits can be used for conventional electrical accessories.
That's up to 18 accessories managed through one HEX ezCAN Ordos, provided the combined electrical load stays within the controller's limits.
KTM model compatibility
The HEX ezCAN Ordos supports:
- KTM 1390 Super Adventure S (2026 onwards)
- KTM 1390 Super Adventure S EVO (2026 onwards)
- KTM 1390 Super Adventure R (2026 onwards)
Important: The Ordos is specifically designed for these 2026 onwards models. It is not compatible with earlier KTM 1390 models or other KTM motorcycles.
If you have a different KTM, you may need the HEX ezCAN Gobi or the HEX ezCAN PURE Universal Accessory Manager. Just give us a shout, we can help identifying the right controller for you.
What's included?
- 1 x HEX ezCAN Ordos accessory controller
- 1 x Micro USB cable with USB-A and USB-C connections
- 4 x Two-wire stub connectors
- 4 x Additional terminal wires
- 4 x Blanking seals
- 3 x Blanking plugs
- 20 x Cable ties
Additional accessory-specific wiring, extension cables or connectors may be required depending on what you're installing.
Installation and configuration
The HEX ezCAN Ordos is designed for straightforward integration with compatible KTM 1390 models.
The unit connects to the bike's OBD-II diagnostic connector and battery, with the controller itself typically fitted beneath the pillion seat.
Accessories are connected to the appropriate output circuits and configured using the free HEX ezCAN software.
You can find the manufacturer's detailed HEX ezCAN Ordos installation guide here.
Need help choosing or installing your accessories?
At Moto-Mate, we regularly install CAN bus controllers, DENALI auxiliary lights, horns and other electrical accessories.
If you're planning to upgrade your KTM 1390 Super Adventure but aren't sure which cables, connectors or accessories you need, get in touch.
We can help you put together the right setup, supply the necessary parts or take care of the installation through our UK-wide fitting service.
Frequently Asked Questions
Can I use the HEX ezCAN Ordos on my 2025 KTM 1290 Super Adventure?
No. HEX specifies the Ordos for the 2026 onwards KTM 1390 Super Adventure S, S EVO and R models only.
What's the difference between the HEX ezCAN Ordos and the HEX ezCAN PURE?
The Ordos is a bike-specific controller that connects directly to the KTM's CAN bus. This allows it to use supported signals and controls from the motorcycle.
The PURE is a universal accessory controller that works independently of the bike's CAN bus and uses separate trigger wiring instead.
Do I need additional cables to install accessories?
The Ordos includes connectors for its four output circuits. Depending on your accessories and where they're mounted, you may need additional extension cables, splitters or adapter harnesses.
Here's a video where you can learn a bit more about the ezCAN PURE:
Please note: Limited Functionality for Some Motorcycles
The HEX ezCAN PURE Universal Accessory Manager is a universal-fit product designed to work with a wide range of 12V motorcycles. However, universal products are not guaranteed to be compatible with each and every motorbike.
In order to install this product successfully it requires access to specific trigger signals, including high beam, ignition, indicators, brake and horn. Some modern motorcycles utilise digital control systems where certain functions — such as high beam and/or brake lights — are operated via digital communication signals rather than traditional on/off trigger wires. In such cases, the required analogue trigger signals may not be accessible.
Before purchasing or installing the HEX ezCAN PURE, please consult your motorcycle’s owner’s manual and carefully review the product specifications and installation requirements to ensure compatibility with your vehicle. Or, just get in touch with our experts, we're here to help!
Frequently asked questions
FAQs for the HEX ezCAN PURE Universal Accessory Controller. If you can't find what you are looking for, just give us a shout, we are here to help!
In most cases, yes.
The ezCAN PURE is designed to work with almost any 12V motorcycle, whether it has CAN bus or not. It’s the ideal solution when there’s no dedicated plug & play accessory controller available for your bike.
If you’re unsure, just get in touch with us. We’ll confirm compatibility and recommend the right setup.
Yes! The ezCAN PURE works independently from your bike’s CAN bus system. That means it’s perfectly suited for CAN bus bikes that don’t have a dedicated ezCAN or CAN bus accessory controller available.
In most cases, yes. The ezCAN PURE is a universal system, so you’ll typically need the appropriate harnesses to connect your accessories like aux lights, horns or brake lights.
This kit offers you the various choices of ontop wiring, extension cables, handlebar-mounted switch to make it quick and easy for you to get what you need; but also to give you the peace of mind that everything will work together. If you are unsure, don’t worry, just give us a ring, we are happy to recommend the best setup for you and your bike.
It depends on your experience.
The ezCAN PURE is not a plug & play solution for most bikes, so it does require some basic electrical understanding. You’ll need to connect it to your bike’s power supply and ignition feed, and then wire in your accessories.
If that’s not something you’re comfortable with, we’re here to help.
We can:
- Advise you on the right setup
- Supply the correct harnesses
- Install the system for you
Related products
