HEX ezCAN PURE Universal Accessory Manager – Plug & Play Kit
From: £195.00
The HEX ezCAN PURE is universal-fit accessory manager for almost all motorcycles with 12 volt electrics. If there is no dedicated CAN bus accessory controller for your bike, this PURE controller is what you need! It offers 4 highly configurable power output circuits so finally you can upgrade the meager light or the squeaky horn on your bike. There are some bike-specific plug & play harnesses, otherwise talk with us how to install lights on your bike with this HEX Pure accessory manager.
If you’ve ever looked at CAN bus accessory controllers and thought “great… but not for my bike”, this is exactly what you’ve been waiting for.
This HEX ezCAN PURE Universal Accessory Manager Plug & Play Kit brings smart accessory control to almost any 12V motorcycle. Whether your bike has CAN bus or not, if there’s no dedicated plug & play solution available, this is your way in.
We have put this ezCAN Pure kit together to make your life even easier when it comes to adding accessories.
This kit allows you to order the ezCAN PURE and add
- a Plug & Play harness (if there is one for your bike, see beneath list or the dropdown on the right)
- either just the lighting kit (which you need to add 2 auxiliary LED front lights)
- or the complete ezCAN extension kit (which allows you to add front and rear lights, brake lights, a horn and other accessories)
- or just a horn extension cable
- and the ezSWITCH handlebar-mounted button, all in one kit.
A proper accessory solution for almost all bikes
Most accessory controllers are built for specific bikes with CAN bus integration.
That’s fine if yours is supported. If not, you’re usually left with relays, messy wiring and a setup you don’t fully trust.
The ezCAN PURE fixes that. It gives you a clean, central system to run your accessories properly, without relying on bike-specific CAN integration. That makes it ideal for both non-CAN bikes and CAN bus bikes that simply don’t have a dedicated controller available for them.
How does the HEX ezCAN PURE work?
The ezCAN PURE connects directly to your bike’s electrical system rather than its CAN bus.
Once installed:
- You get 4 configurable output circuits
- 30 Amp total current handling capacity
- You connect your accessories using the appropriate harnesses
- With HEX ezBUS functionality which lets the white output circuit accommodate up to 15 low-powered 'smart' accessories, increasing the maximum number of allowed accessories to 18.
- You connect to your bike's control wiring via a generic input harness (included), or through a range of optional input harnesses (more see beneath)
- You configure everything via HEX’s intuitive software
- Benefit from HEX' rugged dust-resistant and water-resistant design
This allows you to:
- Control auxiliary lights with dimming and high beam sync
- Upgrade your horn without overloading circuits
- Add heated gear or other accessories safely
- Keep your wiring clean and organised
The ezCAN PURE works with almost any 12V motorcycle and gives you four configurable output channels with a combined 30A capacity. That’s more than enough for most real-world setups.
Whether you’re adding auxiliary lights, upgrading your horn or building a full touring setup, it gives you the flexibility to do it cleanly. The ezCAN PURE comes with 5 Years of Warranty.
Plug & play with some ready-made harness kits
While the PURE is designed to be universal, HEX has already developed plug & play harnesses for these bikes:
- CFMoto 450 (2024 onward)
- Honda CRF300L (2021-2024), CRF300L with LED headlight (2025 onward), & CRF300L Rally (2021 onward)
- Honda XL750 Transalp (2023 onward)
- Kove 800X (2024 onward), 800X Rally (2025 onward), 800X Pro (2026 onward) and 800X Touring (2026 onward)
- KTM 390 Adventure X, 390 Adventure R and 390 Enduro (2025 onward)
- Royal Enfield Himalayan 450 (2024 onward)
- Yamaha Ténéré 700 models (2025 onward)
If your bike is one of them, installation becomes even quicker and neater.
We stock all available harness kits and can help you choose the right setup if you’re unsure.
Typical use cases of the ezCAN PURE
- Adding auxiliary lights to unsupported bikes
- Installing a more powerful horn safely
- Running multiple accessories from one system
- Building a tidy, reliable electrical setup for touring
Why we recommend the ezCAN PURE Kit
We install accessory systems like this day in, day out. Lights, horns, full setups for touring bikes, trackers, cameras, the lot. And we’ve seen some proper "creative" wiring solutions out there.
That’s exactly why we rate the ezCAN PURE.
If your bike isn’t supported by a dedicated CAN bus controller, the ezCAN PURE gives you a clean, reliable way to install accessories. No guesswork, no overloaded circuits, no “that’ll probably be fine” wiring.
Just as important, we know this isn’t a product everyone wants to install themselves. And that’s absolutely fine.
This kit here gives you a lot of options to install accessories on your bike. But please, if you’re unsure:
- which harness you need
- which accessories work best for your bike
- or where and how to mount everything cleanly
just get in touch.
We’ll talk you through your options, based on how you ride and what you actually need. And if you’d rather have it installed, we can take care of that as well.
Here's a video where you can learn a bit more about the ezCAN PURE:
Please note: Limited Functionality for Some Motorcycles
The HEX ezCAN PURE Universal Accessory Manager is a universal-fit product designed to work with a wide range of 12V motorcycles. However, universal products are not guaranteed to be compatible with each and every motorbike.
In order to install this product successfully it requires access to specific trigger signals, including high beam, ignition, indicators, brake and horn. Some modern motorcycles utilise digital control systems where certain functions — such as high beam and/or brake lights — are operated via digital communication signals rather than traditional on/off trigger wires. In such cases, the required analogue trigger signals may not be accessible.
Before purchasing or installing the HEX ezCAN PURE, please consult your motorcycle’s owner’s manual and carefully review the product specifications and installation requirements to ensure compatibility with your vehicle. Or, just get in touch with our experts, we're here to help!
Frequently asked questions
FAQs for the HEX ezCAN PURE Universal Accessory Controller. If you can't find what you are looking for, just give us a shout, we are here to help!
In most cases, yes.
The ezCAN PURE is designed to work with almost any 12V motorcycle, whether it has CAN bus or not. It’s the ideal solution when there’s no dedicated plug & play accessory controller available for your bike.
If you’re unsure, just get in touch with us. We’ll confirm compatibility and recommend the right setup.
Yes! The ezCAN PURE works independently from your bike’s CAN bus system. That means it’s perfectly suited for CAN bus bikes that don’t have a dedicated ezCAN or CAN bus accessory controller available.
In most cases, yes. The ezCAN PURE is a universal system, so you’ll typically need the appropriate harnesses to connect your accessories like aux lights, horns or brake lights.
This kit offers you the various choices of ontop wiring, extension cables, handlebar-mounted switch to make it quick and easy for you to get what you need; but also to give you the peace of mind that everything will work together. If you are unsure, don’t worry, just give us a ring, we are happy to recommend the best setup for you and your bike.
It depends on your experience.
The ezCAN PURE is not a plug & play solution for most bikes, so it does require some basic electrical understanding. You’ll need to connect it to your bike’s power supply and ignition feed, and then wire in your accessories.
If that’s not something you’re comfortable with, we’re here to help.
We can:
- Advise you on the right setup
- Supply the correct harnesses
- Install the system for you
